Earlier this week I posted on how to create a detailed spreadsheet, and I realize most people aren’t going to get as detailed as me :). But one of the reasons I have so many columns in my spreadsheet is because I consider a number of factors when I decide how I’m going to approach querying. There is no right way to do this. I wish that querying were a science, but it’s not. I have approached it differently with every manuscript. The manuscript I’m polishing for Pitch Wars will be the sixth manuscript I query. Fingers crossed it’s the final one (eternal optimist here!).
Because I revived this series as a result of Pitch Wars, I’m going to angle it a little more that way. First of all, I’d make sure all of the agents (who accept your age/genre) participating in Pitch Wars are on your list. On my spreadsheet, I went through and marked these agents as Round 0 because I have not yet queried this manuscript. That way when I am finished updating my agent list and sort it, all of the PW agents will rise to the top. But, a few words of caution about the agent round in a contest:
- Just because an agent doesn’t request your manuscript in a contest doesn’t mean he/she isn’t interested. There are A LOT of entries to go through. They may not get to yours. Or, your entry may shine better with a full query/sample. I’ve had agents request from me later when they skipped over my entry in a contest.
- An agent participating in a contest may not be the best agent at the agency for your MS. I’m not saying you should ignore a request from them in the contest. But don’t assume a no-request from that agent in the contest means you shouldn’t query someone else at the agency.
Once all PW agents are accounted for, it’s time to start organizing the other agents into querying rounds, and this is even a little more tricky if you’re involved in a contest. (For PW, keep in mind you can’t query other agents until after the agent round.) If you have a ton of interest from the contest, you may want to go big and query the top agents on your list in case you have an offer from one of the contest agents. If you don’t have as many requests, you may want to be more cautious and test out your query and pages with smaller rounds. It’s really a matter of your confidence in your manuscript.
If it’s your first manuscript and you’re at all nervous about it, I’d start out with smaller rounds to test the waters–perhaps somewhere around seven queries at a time. If you’re more confident and know your materials are ready, you might want to do larger rounds of ten or fifteen. I’ve seen writers who do even more. Once you’ve decided the number, you can go back to the main question …
Who should you query first?
The million-dollar question! Here are some possibilities, along with pros and cons:
- Your top-ranked agents
- Pro: You’ll know right away if the agents you think are the best fit are a match.
- Con: If your materials aren’t ready, you’ve lost your chance at your top picks. Here’s the good news if you’re a Pitch Wars mentee: You’ve already had a mentor (or two!) vet your materials, so hopefully they’re in great shape. But that doesn’t mean you should assume they’re perfect. There’s always the chance you need to make additional tweaks.
- Other consideration: Keep in mind there’s no such thing as a dream agent. You might think someone’s a perfect fit based on what you read online, but you won’t know for sure until you have The Call and hear his/her vision for your book, so don’t let it get you down too much if that one agent you think is perfect rejects your query. Also remember there are many amazing agents out there without an online presence who are making deals and working hard for their clients. The right agent for you might be one of those you couldn’t find a lot of information about online and so didn’t rise to the top of your list.
- Agents with the most requests
- Pro: They may be more likely to request yours as well. Even if they do eventually reject, perhaps they’ll give you valuable feedback.
- Con: You might feel worse if they don’t request yours. BUT, always remember: subjectivity.
- Agents who respond
- Pro: You will get an answer.
- Con: None. This one’s a no-brainer for your first round in my opinion, unless you feel super-confident and there’s a no-response agent you just have to query right away.
- Agents who respond quickly
- Pro: You’ll know quickly what’s working.
- Con: Faster rejection.
- Agents who want a query only
- Pro: This can tell you that your query’s effective. (You should do this with other writers before querying agents to make sure the query is clear, but agents still react differently than writers since they’re looking at the market as well, so it can be an effective strategy.)
- Con: You can’t rely too heavily on this as tastes are still subjective. You may still get rejections that have nothing to do with your query needing work. (See my post on what I learned in a year of querying. I have a section on this.) My best advice here is that if you send out a round that is entirely query-only and they all reject, it’s probably your query. If you get at least a couple of requests, the other rejections may be due to tastes.
- Agents who want a certain amount of pages
- Pro: This may help you test out your pages, if agents are consistently requesting more.
- Con: Again with the caution about tastes being subjective. Plus, you can’t be sure whether an agent requested/rejected based on the query.
- Agents with whom you’ve had contact (met at a conference, requested from you before, etc.)
- Pro: Having a previous relationship with an agent can get you in the door, although it still comes down to the right fit.
- Con: It might hurt more if they reject you. Plus, having a previous relationship with an agent could blind you to another agent at the same agency who could be a better fit. Even if an agent has requested from you before, they might not again, as I’ve commented on before.
- A combination
- Pro: You don’t burn through all of your top-ranked agents at the beginning of your query list if you discover the MS needs a revision.
- Con: If you get an offer, you may miss some of your top-ranked agents. Including some slow responders in early rounds may cause longer waits.
So, basically, it all comes down to what you’re comfortable with, and that’s different for everyone. I can’t give you a magic formula. I wish I had one myself!
How do you sort them into rounds?
Once you’ve figured out that all-important factor of how you want to organize your first round, you can sort the spreadsheet in a variety of different ways to plan out the rest of your rounds. Sort by Rank to go with your top-ranked agents first, by [genre/category] requests? in descending order to go with the agents with the most requests first, by Sub note to test a particular submission material, or by Responds? to go with only agents who respond. Generally I don’t sort by that last one–I just scan for it as I’m looking at the other fields. (As a side note, I’ve generally accounted for the Looking for column in my Rank, so any agents who were specifically looking for something that matches my manuscript have a higher rank and would come up there, but I still scan through that column to see if I want to move any agents up to a higher round.)
Once you’ve sorted, just put the round number (1, 2, 3, etc.) and repeat it the number of queries you plan to do in each round (7, 10, 15) until you get through all the agents you plan to query. And, voila, you have your agents set to query! Although nothing has to be set in stone. My list is always flexible. I modify it as contests crop up or if I see an agent tweet about something relevant they’re looking for.
As far as when I move to another round, when I queried my first couple of manuscripts, I waited until I had answers from every agent in a round before I started another. Now when I receive a response from one agent, I send another query. However, it’s still helpful to have these rounds set up because I look back at them to gauge how my query is doing and whether I need to pause and revise anything. It’s up to you what you feel comfortable with.
A Pitch Wars side note: Any of those PW agents who didn’t request from you? If you still want to query them, just sort them into the rounds with the rest.
Once you start querying, what’s the best way to track queries?
If you’re not a spreadsheet-lover like me, you can just track them in QueryTracker, and I do use that resource as well, but I still use my spreadsheet since I go an extra step and estimate out when I should hear back from an agent. While it’s still a game of averages and an agent may reply to me sooner or later than someone else, it keeps me from watching the site daily or refreshing my inbox, waiting for that agent to reply. Believe me, that way lies madness.
In the Query Sent field I just put the date I sent the query. Then, I calculate when I should hear back from the agent by referring to the Response Time field. If the agent lists a specific number of weeks in which he/she will respond, I count it out on my calendar and plug that date into the Should hear back by: field. If it’s an agent who says “six weeks if interested,” then my note in that field will list the date followed by “–close if no response.” If, on the other hand, the agent has instructions to follow up after a certain number of weeks, I include the date followed by “–follow up if no response.” However, I do monitor the agent’s Twitter feed/blog to see if they note that they’re behind. If so, I hold off on following up. Some agents may have a date with no instructions; there’s no action to take but it’s just to give me an idea of when I might hear. Others might have a question mark if the agent doesn’t list an expected response time. This field is really for my own piece of mind so I already have reasonable expectations on when I should receive a response.
When I receive a Query Response, I include the date and then whether it is a form rejection, personalized form rejection, detailed rejection, or request. Or, as mentioned above, if it’s an agent who lists a specific time in which they’ll respond if interested, I close it out.
- For the first two, I put [date] – form/personalized form rejection, then I move the entire row to a new sheet within the spreadsheet labeled rejections. For me, keeping rejections in the same sheet with active queries is both clutter and sort of depressing.
- For a detailed rejection, I put [date] – [pasted copy of the agent’s comments]. Once again, I move the row to the rejections sheet in the spreadsheet.
- For a query past the agent’s stated response time if interested, I put [date] – closed due to no response. Then, you guessed it, I move the row to the rejections sheet.
- For a request (yay!), I put [date] – partial/full request; [date] – sent. If the agent replies that they received the request, I note that in parenthesis. Not all agents do, though. Then, I have more fun playing with statistics. Remember I mentioned the Agents with Similar Tastes report in QueryTracker in the last post? Well, when I receive a request, I do the following:
- Go to the agent’s profile and click on Reports.
- Under Select a Report, choose Agents with Similar Tastes (must have a premium membership).
- To the right, a new pull-down menu will appear. Under Select a Genre, select the genre/category for your manuscript, and then click View Report.
- For each agent listed in the report, make a tally mark in the Note column (third from the left). Does this mean that because these agents have requested the same manuscripts before they’ll both request yours? Not necessarily (who knows what those other manuscripts were??), but it doesn’t hurt to track the information. I’ve been tracking this for five manuscripts now, and I’ve noticed that many of the agents with numerous tallies have eventually turned into requests for subsequent manuscripts, so I keep doing it!
For Partial Response, I use a similar system to the above–the date followed by the type of rejection or request (probably a full at this point!). And for Full Response, again a date and the type of rejection or, dare we hope, an offer! Perhaps you receive a revise and resubmit, but that’s a whole other post I’m not getting into here. If you get an offer, you’re probably done with the spreadsheet :). Well, maybe if you get more than one you’ll still take some notes.
So here are a couple of last-minute tips.
- You’ve spent the time researching the agents, so pay attention to what they want! Don’t think you’ll be the exception to their guidelines or what they’re looking for. Don’t query more than one agent at the same agency unless they say you can, and don’t query an agent who is closed to queries.
- Don’t query and tell. No matter what querying strategy you choose, agents want to feel like they’re your first choice. Who doesn’t? So don’t tweet or blog about how many agents you’ve queried or how many submissions you have out. Now, Pitch Wars is a unique situation, so in that case they’ll know the competition, and if you mention PW in your query to non-PW agents, they might check out your entry (although I doubt many would take the time). Just don’t put anything more out there than you have to. This is a time to be demure and keep your lips sealed. If you want to share with a friend, do it privately. (Like in the PW Facebook group :)).
- Your spreadsheet is a living document. Keep updating it whenever new information crops up about agents who interest you, whether it’s a tip they share about something they’d like to represent or a book you’ve read from their list.
I think that’s it. Any final questions? Any other veteran queriers have tips to add?